EasyManuals Logo

Fuji Xerox DocuCentre S2420 User Manual

Fuji Xerox DocuCentre S2420
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #274 background imageLoading...
Page #274 background image
13 Problem Solving
274
Problem Solving
13
073-104 [Cause] A paper jam occurred in the one tray module cover [B] or the two
tray module cover [C].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
073-105 [Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
073-210 [Cause] An error occurred in Tray 3 (Two Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
074-101
074-102
[Cause] A paper jam occurred in the two tray module cover [C] or Tray 4.
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
074-104 [Cause] A paper jam occurred in the one tray module cover [B] or the two
tray module cover [C].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
074-105 [Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
074-210 [Cause] An error occurred in Tray 4 (Two Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
075-135
077-101
077-103
077-104
077-106
[Cause] A paper jam occurred in the left cover [A].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
077-129 [Cause] A paper jam occurred in the left cover [A].
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
077-211 [Cause] An error occurred in the Two Tray Module.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
077-212 [Cause] An error occurred in the One Tray Module.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
077-300 [Cause] The front cover is open.
[Remedy] Close the front cover.
077-301 [Cause] The left cover [A] is open.
[Remedy] Close the left cover [A].
Error Code Cause and Remedy

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre S2420 and is the answer not in the manual?

Fuji Xerox DocuCentre S2420 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre S2420
CategoryAll in One Printer
LanguageEnglish

Related product manuals