Fuji Xerox DocuCentre S2420 User Manual

13 Problem Solving
276
Problem Solving
13
091-914
091-915
091-916
[Cause] An error occurred with the drum cartridge.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
091-921 [Cause] An error occurred with the drum cartridge.
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox
representative or sales representative.
092-660 [Cause] A drum cartridge error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
092-661 [Cause] Temperature SNR (in CRU) value is out of range.
[Remedy] Exchange the Sensor unit, and switch off the machine power, make
sure that the display is blank, and then switch on the machine
power.
092-668 [Cause] ATC SNR (in drum cartridge) value is out of range.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
092-910 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
093-312 [Cause] An error occurred with the toner cartridge.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
093-400 [Cause] There is no more toner in the toner cartridge.
[Remedy] Replace the toner cartridge.
093-406 [Cause] The toner cartridge needs to be replaced soon.
[Remedy] Prepare a new toner cartridge.
093-912 [Cause] There is no more toner in the toner cartridge.
[Remedy] Replace the toner cartridge.
093-956 [Cause] There is no more toner in the toner cartridge.
[Remedy] Remove the seal on the drum cartridge.
093-959 [Cause] An error occurred with the drum cartridge.
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox
representative or sales representative.
Refer to "Replacing the Toner Cartridge" (P.227).
116-321
116-323
116-324
116-334
116-377
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
Error Code Cause and Remedy

Fuji Xerox DocuCentre S2420 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2420
Category	All in One Printer
Language	English