3 Copy
136
Copy
3
Corner Shift
Shifts document images so that they are placed at an edge or corner of paper. You can
select from 8 shift directions.
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to create
a negative image of the document when making copies.
Note • When [Output Color] is set to [Black & White] or [Single Color], the black color on the document is
inverted to white, and the white color to black.
• When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns to white.
1
Select [Invert Image].
2
Select any option.
Mirror Image
Reverses the left and right sides of the document image.
Negative Image
Creates a negative image of the document.
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
1
Select [Original Orientation].
To Next Page
Loading...
Need help?
General
