To Next Page

To Previous Page

2 Product Overview

Product Overview

Note • Under [Default Language] in the System Administration mode, you can select the standard

language displayed on the touch screen when the power is switched on. For more information on

how to set [Default Language], refer to "5 Tools" > "Common Service Settings" > "Screen/Button

Settings" > "Default Language" in the Administrator Guide.

 Screen Brightness

You can adjust the screen brightness of the touch screen.

 Lock Out Printer/Release Printer

You can set the machine to temporarily enable printing during the printer lockout period or

to temporarily disable printing while [Release Printer] is displayed.

Note • You can assign this button when [Printer Lockout] is set to [On] under [Tools] > [Common Service

Settings] > [Machine Clock/Timers] and the [Allow User to Lock Out] check box is selected. For

information on how to assign the feature to the button, refer to "5 Tools" > "Common Service

Settings" > "Screen/Button Settings" in the Administrator Guide.

 Setup

You can create or update folders, job flows, and the Address Book.

For more information, refer to "5 Tools" > "Setup" in the Administrator Guide.

 Calibration

The machine can automatically calibrate colors when the reproducibility of density or color

in copies and prints deteriorates.

For more information, refer to "3 Maintenance" > "Executing Calibration" in the Administrator Guide.

 Activity Report

You can print an Activity Report to check if a transmission is successfully completed.

For information on the contents listed in the Activity Report, refer to "16 Appendix" > "Activity Report" in the Administrator

Guide.

 Fax Receiving Mode

You can specify a mode for receiving faxes.

For more information, refer to "4 Machine Status" > "Machine Information" > "Fax Receiving Mode" in the Administrator

Guide.

Note • This service is not available for some models. An optional component is required. For more

information, contact our Customer Support Center.

 Print Mode

You can register a print mode and change its settings.

For more information, refer to "4 Machine Status" > "Machine Information" > "Print Mode" in the Administrator Guide.

Fuji Xerox DocuCentre-V C5580 User Manual

Other manuals for Fuji Xerox DocuCentre-V C5580