5 Scan
298
Scan
5
Add New Address (Registering a Recipient on the Address Book)
You can register addresses on the Address Book. The current recipients specified on the First
Tab screen can also be registered.
Note • [Add New Address] is not displayed depending on the settings in the System Administration mode or
depending on the number of registered recipients. Ask your system administrator to confirm the
settings and the number of recipients.
1
Select [Add New Address].
2
Select a method to register a recipient.
New
Enter a new recipient using the keyboard.
Add current recipient
Select a recipient to be registered from the current recipients specified on the First Tab
screen.
Note • This item cannot be selected if no recipient is specified on the First Tab screen.
When [New] is selected
3
Use the keyboard displayed on the screen to enter an e-mail address with up to 128 single-
byte characters.
4
Select [Next].
Note • To return to the previous screen, select [Back].
When [Add current recipient] is selected
3
Select a recipient to be registered.
4
Select [Next].
Note • To return to the previous screen, select [Back].
5
Select [Name], enter a name using the
keyboard displayed on the screen, and then
select [Save].
To Next Page
Loading...
Need help?
General
