Importing Scanned Data
459
Computer Operations
12
• To delete the file in the folder, click [Delete] on the toolbar.
6
Select a file to be imported from the list, and click [Import].
Note • You can select multiple files.
• When [File Saving Options] is set to [Set Destination for Each File] under the import settings, a dialog
box for specifying a save destination is displayed. When the dialog box appears, specify a save
destination, and click [OK].
For information on the import settings, refer to "Import settings for scanned files" (P.460).
7
The file is imported to the specified directory.
Note • When [File Saving Options] is set to [Save in Fixed Destination] under the import settings, a file is
saved in the specified directory.
For information on the import settings, refer to "Import settings for scanned files" (P.460).
Changing Stored File Manager 3 Settings
To learn about fields in the displayed dialog box, click [Help] to view the Stored File Manager 3 help.
Changing the display of scanner names
You can change the display of scanner names listed.
To change the display of scanner names, use the dialog
box that appears by clicking [Search/Display Settings]
in the scanner selection dialog box.
Under [Scanner Name Display], you can change the
method in which scanner names are displayed in
[Scanners Detected].
Specify scanners to search for under [Search Target
Settings].
Note • If click [Add] and then register a scanner, you can
display scanners from other networks.
To Next Page
Loading...
Need help?
General
