Fuji Xerox docucentre-v c5585 Administrator's Guide

16 Appendix
652
Appendix
16
 Finisher D2-P with Booklet Maker (optional)
Punch Number of Holes : 2/4 hole or US 2/3 hole (optional)
Paper Size :
A3, 11 x 17", B4, A4
*
, A4 , 8.5 x 11", 8.5 x 11" , B5 , 7.25 x 10.5" , 8 x
10"
*
, 16K, Cover A4 , 9 x11", 215 x 315 mm, 8.5 x 13"
*
, 8.5 x 14"
*
, Legal,
11 x 15", 8K
* : The 3 holes (optional) are not available.
Note • The Punch Unit 2/4H CD1 (optional) or the Punch Unit US 2/3H CD1
(optional) is required.
• 2 or 4 holes are available when the Punch Unit 2/4H CD1 is installed. 2
or 3 holes are available when the Punch Unit US 2/3H CD1 is installed.
Paper Weight : 64 - 200 gsm
Important • When using 80 gsm paper.
Booklet Finishing
Maximum number of sheets : 16 sheets
*
, 5 sheets (center folding),
1 sheet (single folding)
Paper size : Maximum: 13 x 18",
Minimum: B5
Paper weight : 64 - 220 gsm, 64 - 220 gsm (center folding), 64 - 220 gsm
(single folding)
* : The maximum number of sheets may vary depending on the paper type of the cover. The
booklet may open depending on the size and type of the sheets.
Important • When using 80 gsm paper
Folding

Z fold
Paper size : A3, B4, 11 x 17"
Paper type : 90 gsm or less

C fold
Paper size : B5
Paper weight : 90 gsm or less
Important • The Folder Unit CD1 (optional) is required to use the folding feature.
Power Supply/Maximum
Power Consumption*
AC 220 - 240 V ±10%, 0.5 A for both 50/60 Hz
100 W or less
* : This is for the Folder Unit CD1. The another power source is required when the Folder Unit
CD1 is installed.
Dimensions Width 898 x Depth 589 x Height 1,056 mm
Width 1,370 x Depth 726 x Height 1,056 mm (when the Folder Unit CD1
and the punch unit is installed)
Note • When the Transport Unit V1 is installed and the extended tray is fully
extended.
Weight 61 kg
117 kg (when the Folder Unit CD1 and the punch unit is installed)
Note • Includes the weight of the Transport Unit V1.
Space Requirement Width 2,068 x Depth 804 mm (main unit + C3 Finisher with Booklet
Maker)
Width 2,303 x Depth 804 mm (main unit + C3 Finisher with Booklet Maker
+ Folder Unit CD1 + punch unit)
Note • When the Transport Unit V1 is installed and the extended tray is fully
extended.
Type Top tray x 1 : Collate / Stack
Finisher tray x 1 : Collate (offset stacking available)
Stack (offset stacking available)
Booklet tray x 1 : Collate / Stack

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English