Fuji Xerox docucentre-v c5585 Administrator's Guide

Specifications
651
Appendix
16
 C3 Finisher with Booklet Maker (optional)
Space Requirement Width 2,010 x Depth 804 mm (main unit + C3 Finisher)
Width 2,245 x Depth 804 mm (main unit + C3 Finisher + Folder Unit CD1 +
punch unit)
Note • When the Transport Unit V1 is installed, and the extension tray is
extended completely.
Type Output tray x 1 : Collate
Stack
Finisher tray x 1 : Collate (offset stacking available)
Stack (offset stacking available)
Booklet tray x 1 : Collate
Stack
Paper Size Output tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: Postcards (100 x 148 mm), 8.5 x 5.5" (215.9 x
139.7 mm)
Finisher tray Maximum: 13 × 19" (330 × 483 mm),
12.6 × 19.2" (320 × 488 mm)
Minimum: B5 , 8 × 10"
Booklet tray Maximum: 13×18" (330 × 457 mm), A3
Minimum: B5
Paper Weight Output tray 64 - 300 gsm
Finisher tray 64 - 300 gsm
Booklet tray 64 - 220 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (not stapled)
A4: 1,500 sheets
B4 or larger:1,500 sheets
Mixed stack
*1
:300 sheets
Finisher tray (stapled)
A4: 200 sets or 1,500 sheets
B4 or larger:100 sets or 1,500 sheets
Mixed stack
*1
:70 sets or 200 sheets
Booklet tray 20 sets
*2
*1 : Larger size paper is stacked on top of smaller size paper.
*2 : Some papers may not be placed into tray depending on the paper type.
Important • When using 80 gsm paper.
Staple Capability : 50 sheets (90 gsm or less)*
* : When the C3 Finisher Staple Unit 65 Sheets (optional) is installed, at the maximum of 65
sheets can be stapled. Depending on the paper type, copies may not be aligned or stapled
properly.
Paper Size : Maximum: A3, 11 x 17",
Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English