Printing Basics 145
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print drivers.
• Using the Windows Print Driver
This section explains the procedure using Windows 7 as an example.
NOTE:
• The way to display the printer Properties/Printing Preferences dialog box differs according to the application
software. Refer to the manual of your respective application software.
1 From the application menu, select Print.
2 Select your printer and click Preferences.
3 Select the Paper/Output tab.
4 From the Paper drop-down menu, select Advanced Paper Selection.
5 Select the paper size of the source document from Original Document Size.
6 Specify Scale Options.
If you select the custom paper size from Original Document Size in step 5, select No Scaling
and go to step 8.
If you select the standard paper size from Original Document Size in step 5, select
Automatically Scale and go to step 7.
7 Select the custom paper size from Output Paper Size.
8 Select the appropriate paper type from Bypass Paper Type.
9 Click OK twice.
10 Click Print in the Print dialog box to start printing.
To Next Page
Loading...
Need help?
General
