500
Out of Fax Memory The machine's fax memory is
full.
If you are using Fax Preview function, delete
unwanted received fax data.
If you are using Memory Receive function and
are not using fax preview function, print received
fax data. To print fax data, press
Settings > All Settings > Fax >
Print Document.
Out of Memory The machine's memory is full. If a fax-sending or copy operation is in
process
Do one of the following:
•Press Send Now to send the pages scanned
so far.
•Press Partial Print to copy the pages
scanned so far.
•Press Quit or and wait until the other
operations that are in progress finish, and
then try again.
If a scan operation is in process
• Split the document into multiple parts.
• Reduce the Resolution.
• Reduce the File Size.
• Select the high compression PDF file type.
• Clear faxes from the memory.
If a print operation is in process
Press and reduce the print resolution.
Output Tray Full The output paper tray is full. Remove printed paper from output tray indicated
on the LCD.
Paper Low
Paper Low T1
Paper Low T2
Paper Low T3
The paper tray is nearly empty. Refill the paper in the paper tray indicated on the
LCD.
Print Data Full The machine’s memory is full.
Press and delete the previously stored
secure print data.
Print Unable ## The machine has a mechanical
problem.
• Press and hold to turn the machine off,
wait a few minutes, and then turn it on again.
• If the problem continues, contact Fuji Xerox
customer service.
Received Fax ## An unprinted received fax is
waiting to print on the correct
size paper.
To print the received fax, load the correct size of
paper in the tray indicated on the LCD. Paper
sizes available for fax printing are A4, Letter,
Legal, Folio, Mexico Legal and India Legal.
Replace Toner The toner cartridge is at the
end of its life. The machine
stops all print operations.
While memory is available,
faxes are stored in the memory.
Replace the toner cartridge with a new one.
Error Message Cause Action