603
*1
Available if the Tray Module(s) (Optional) is installed.
[All Settings] > [Shortcut Settings]
Tray Setting Check Size - Select whether to display a message telling you to
check that the size of the paper in the machine and
the machine's Paper Size setting match.
Tray Use: Copy - Select the tray to be used for Copy.
Tray Use: Fax - Select the tray to be used for Fax.
Tray Use: Print - Select the tray to be used for Print.
Skip Tray
*1
- Select a specific tray you do not want to use; if it is
loaded with paper of the wrong size.
Separator Tray
*1
- Select the tray that contains the paper used as the
separator paper, which is inserted between each
print job.
Volume Ring - Adjust the ring volume.
Beep - Adjust the beeper volume.
Speaker - Adjust the speaker volume.
LCD Settings Backlight - Adjust the brightness of the LCD backlight.
Dim Timer - Set how long the LCD backlight stays on after you
go back to your Home screen.
Screen
Settings
Home Screen - Set the default Home screen settings.
Copy Screen - Set the default Copy screen settings.
Scan Screen - Set the default Scan screen settings.
Display
Information
Date & Time Set the default display information settings.
IP Address
Ecology Toner Save - Increase the page yield of the toner cartridge.
Sleep Time - Set how much time will pass before the machine
enters Power Saving Mode.
Quiet Mode - Decrease printing noise.
Auto Power Off - Set the number of hours that the machine will
remain in Deep Sleep Mode before going into
Power Off Mode.
Setting Lock Set Password - Restrict unauthorised users from changing the
machine’s settings.
Lock Off
On -
Interface Fixed Port On Enable or disable the Fixed Port function.
Off
Delete
Storage
Macro ID Macro ID XX Delete the registered Macro data.
Font ID Font ID XX Delete the registered Font data.
Format - Restore the Macro and Font data of your machine to
the default settings.
Level 1 Level 2 Descriptions
(Select shortcut button) Rename Change the shortcut name.
Edit Change the shortcut settings.
Delete Delete the shortcut.
Level 1 Level 2 Level 3 Descriptions
To Next Page
Loading...
Need help?
General
