611
*1
Life is approximate and may vary by type of use.
*2
Available if the Tray Module(s) (Optional) is installed.
[All Settings] > [Initial Setup]
Parts Life
*1
Drum Display the remaining life of the drum cartridge.
Fuser Display the remaining life of the fusing unit.
Laser Unit Display the remaining life of the laser unit.
PF Kit MP Display the remaining life of the PF kit MP.
PF Kit 1 Display the remaining life of the PF Kit 1.
PF Kit 2
*2
Display the remaining life of the PF Kit 2.
PF Kit 3
*2
Display the remaining life of the PF Kit 3.
Level 1 Level 2 Descriptions
Date & Time Date Add the date and time on the screen and in the headings of the
faxes you send.
Time
Auto Daylight
(For Taiwan and
Australia)
Set the machine to change automatically for Daylight Saving
Time.
Time Zone Set your time zone.
Station ID Fax Enter your name and fax number so it appears on each page
you fax.
Tel
Name
Tone/Pulse
(Not available in New
Zealand)
- Select the dialling mode.
Dial Tone - Shorten the dial tone detect pause.
Dial Prefix - Set a prefix number to always be added before the fax number
every time you dial.
Compatibility - Adjust the equalisation for transmission difficulties.
VoIP service providers offer fax support using various
standards. If you regularly experience fax transmission errors,
select Basic (for VoIP).
Reset Machine Reset Restore all the machine settings that you have changed, such
as Date and Time.
Network Restore all network settings back to the factory settings.
Address Book & Fax Erase all stored phone numbers and fax settings.
All Settings Restore all the machine's settings back to the factory settings.
Factory Reset Restore all settings back to the factory settings.
Local Language
(Available only for some
countries)
- Change your LCD language.
Level 1 Level 2 Descriptions
To Next Page
Loading...
Need help?
General
