26 Basic Operation
10
Confirm the amount of Memory Capacity listed under General in the Printer Settings page.
If the memory capacity has not increased, turn off the printer, and re-install the memory module.
11
If you installed the optional 512MB memory after installing the print driver, update your driver by following the
instructions for the operating system you are using. If the printer is on a network, update the driver for each client.
Updating Your Driver to Detect Optional 512MB Memory
The following procedure uses the PCL 6/PS driver on Windows
®
7 and Windows
®
10 as examples.
NOTE:
• When you use XML Paper Specification (XPS) driver, the following settings are not required.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps:
1
Click the Configuration tab, and then select Installable Options.
2
Select RAM Disk in the Items list box.
3
Select Installed in the RAM Disk drop-down menu under Setting for.
4
Select Memory Capacity in the Items list box.
5
Select the total amount of the installed printer memory in the Memory Capacity drop-down menu under Setting for.
6
Click OK.
7
Click Apply, and then click OK.
The following procedure uses OS X 10.11 as an example.
Windows
®
7 1 Click Start Devices and Printers.
2 Right-click the printer icon of the DocuPrint P365 d or DocuPrint P368 d and select
Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then select OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Windows
®
10 1 Right-Click Start Control Panel.
2 Click Hardware and Sound Devices and Printers.
3 Right-click the printer icon of the DocuPrint P365 d or DocuPrint P368 d and select
Printer Properties.
4 Click the Configuration tab, and then select Bi-Directional Setup.
5 Select Get Information from Printer and then select OK.
6 Click Apply, and then click OK.
7 Close the Devices and Printers dialog box.
OS X 10.11 1 Select the Printers & Scanners in System Preferences.
2 Select the printer in the Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click
OK.
To Next Page
Loading...
Need help?
General
