70 Printer Connection and Software Installation
9
Select the encryption method from WEP 128-bit HEX (26 Bytes), WEP 128-bit ASCII (13 Bytes), WEP 64-bit HEX
(10 Bytes), WEP 64-bit ASCII (5 Bytes), WPA-PSK AES/WPA2-PSK AES, WPA-PSK TKIP, and Mixed Mode PSK in the
Encryption drop-down menu, and then set each item for the encryption method selected.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
NOTE:
• For details on each item, see the Help on CentreWare Internet Services.
10
Click Apply to apply the settings.
11
Turn off the printer, disconnect the Ethernet cable and turn it on again.
Wireless LAN connection setting is complete.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
Reconfiguring the Wireless Settings
To change the wireless setting through the wireless connection from your computer, perform the following.
NOTE:
• Ensure that the wireless connection setting is completed in "Configuring the Optional Wireless Printer Adapter" on page 66.
• The following settings are available when the network mode is set to infrastructure in "Configuring the Optional Wireless Printer
Adapter" on page 66.
1
Check the IP address of the printer.
a
On the operator panel, press the (Menu) button.
b
Select Report / List, and then press the button.
c
Select Printer Settings, and then press the button.
The Printer Settings page is printed.
d
Confirm the IP address next to IP Address under Network (Wireless) on the Printer Settings page.
2
Launch the CentreWare Internet Services by entering the IP address of the printer in your web browser.
3
Click the Properties tab.
4
Click Wireless.
5
Change the wireless settings of the printer.
6
Click Apply to apply the settings.
7
Reboot the printer.
8
Change the wireless settings on your computer or access point accordingly.
NOTE:
• To change the wireless settings on your computer, refer to the manuals provided with the wireless LAN access point or if your
computer provides a wireless adapter tool, change the wireless settings using that tool.
To Next Page
Loading...
Need help?
General
