System expansions
2
1
a
► Push the slot cover into the slot (1).
!
Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it
does not, you will find it difficult to close the locking rail. There is a danger of damage.
► Close the locking rail (2) and press on the locking mechanism in the direction of the arrow. The
word "PUSH" is embossed on the locking mechanism.
For workstations with a fan only:
► Install the fan (see "Installing the fan").
► Close the casing (see "Closing the casing").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the
BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.
A26361-K665-Z126-1-19, edition 1 41
To Next Page
Loading...
Need help?
General
