Fujitsu Siemens Computers CELSIUS M430 - Removing WLAN Module

System expansions
Removing WLAN module
► Open the casing (see "Opening the casing").
► Remove the front (see "Removing the front panel").
► Detach the USB data cable of the WLAN module and, if present, the audio data cable from the
mainboard (see the manual for the mainboard).
1
1
► Press the EasyChange rails in the direction of the arrows (1).
► Pull the slide-in module out of the casing (2).
► Pull the EasyChange rails off the slide-in module.
70 A26361-K665-Z126-1-19, edition 1