Chapter 4: BIOS Setup
40 A26361-D1691-Z120-1-7619, Edition 1
4.3.7 - Advanced Submenu ATA Controller
P-ATA Interface: [P-ATA 1/2 + P-ATA 3/4]
S-ATA Interface: [Enabled]
S-ATA Mode: [Native]
Setup Item Selections (Default
values are in bold)
Item Specific Help
P-ATA Interface: P-ATA 1/2 + P-ATA 3/4
P-ATA 1/2
P-ATA 3/4
Enables/Disables the Parallel ATA channels.
S-ATA Interface: Enabled
Disabled
Enables the Serial ATA Interface.
S-ATA Mode: Compatible
RAID
Native
[Compatible]
Serial ATA is mapped to the standard IDE
drive interface.
[RAID]
Requires two identical SATA drives.
[Native]
Serial ATA configured in native mode. Some
operating systems do not support native IDE
devices.
To Next Page
Loading...
Need help?
General
