Fujitsu Siemens Computers D1691 - 4.5 - Power Menu

Chapter 4: BIOS Setup
A26361-D1691-Z120-1-7619, Edition 1 49
4.5 - Power Menu
APM Interface: [Enabled]
APM Power Saving: [Customized]
Standby Timeout: [15 min]
Suspend Timeout: [Disabled]
APM Resume Timer: [Disabled]
APM Resume Time: [00:00:00]
Power-on via LAN: [Enabled]
Power-off via Keyboard: [Disabled]
Power Failure Recovery: [Last State]
Setup Item Selections (Default
values are in bold)
Item Specific Help
APM Interface: Enabled
Disabled
Enable/Disable Advanced Power
Management (APM) BIOS-interface for non-
ACPI operating systems.
APM Power Saving:
Disabled
Customized
Maximum Power Savings
Minimum Power Savings
Configure the BIOS-controlled APM.
[Disabled]
No BIOS-controlled power management.
[Customized]
User-defined power management.
[Maximum Power Saving]
Minimum power consumption.
[Minimum Power Saving]
Maximum power consumption.
Standby Timeout: Disabled
2 min
5 min
10 min
15 min
30 min
Time the system is inactive before entering
Standby mode. In Standby mode the screen
is dark.