EasyManua.ls Logo

Fujitsu Siemens Computers D1691 - Page 74

Fujitsu Siemens Computers D1691
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix II: Post Error Code for BIOS
64 A26361-D1691-Z120-1-7619, Edition 1
E8POST.ASM starts Description
82h: 1. Call chipset power management hook.
2. Recover the text fond used by EPA logo (not for full screen logo)
3. If password is set, ask for password.
83h: Save all data in stack back to CMOS
84h: Initialize ISA PnP boot devices
85h: 1. USB final Initialization
2. Switch screen back to text mode
87h: NET PC: Build SYSID Structure.
89h:
1. Assign IRQs to PCI devices
2. Set up ACPI table at top of the memory.
8Bh:
1. Invoke all ISA adapter ROMs
2. Invoke all PCI ROMs (except VGA)
8Dh:
1. Enable/Disable Parity Check according to CMOS setup
2. APM Initialization
8Fh:
Clear noise of IRQs
93h:
Read HDD boot sector information for Trend Anti-Virus code
94h:
1. Enable L2 cache
2. Program Daylight Saving
3. Program boot up speed
4. Chipset final initialization.
5. Power management final initialization
6. Clear screen & display summary table
7. Program K6 write allocation
8. Program P6 class write combining
95h:
Update keyboard LED & typematic rate
96h:
1. Build MP table
2. Build & update ESCD
3. Set CMOS century to 20h or 19h
4. Load CMOS time into DOS timer tick
5. Build MSIRQ routing table.
FFh:
Boot attempt (INT 19h)

Table of Contents

Related product manuals