Preparing for use Connect the monitor, mouse and keyboard
10 A26361-K657-Z101-4-7619
Connecting USB keyboard
Use the supplied keyboard cable only.
Ê Plug the other end of the keyboard cable (square plug) into the socket on the underside of the
keyboard.
Ê Insert the rectangular USB plug of the keyboard cable into the USB port of the PC.
Connecting the mouse
Depending on the equipment level selected, your PC will be supplied with a PS/2 mouse or a USB
mouse.
Connecting a PS/2 mouse
Ê Connect the PS/2 mouse to the PS/2 mouse port of the PC.
Connecting USB mouse
Ê Connect the USB mouse to the USB port of the PC.
i
If you do not attach a mouse at the PS/2 mouse port , you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
To Next Page
Loading...
Need help?
General
