Fujitsu Siemens Computers SCENIC T User Manual

A26361-K657-Z101-4-7619 19
Operation
Switching on the PC
Ê Switch the monitor on (see the operating manual for the monitor).
On devices with main power switch
Ê Switch the PC on with the main power switch on the rear of the PC.
Ê Press the ON/OFF switch on the front of the PC.
The power-on indicator lights green and the PC is started.
On devices without main power switch
Ê Press the ON/OFF switch on the front of the PC.
The power-on indicator lights green and the PC is started.
Switching off the PC
On devices with main power switch
Ê Shut down the operating system properly. For Windows: select Shut Down from the Start menu.
Ê If the operating system does not automatically switch off the PC, switch the PC to ready-to-
operate by pressing the power button or turn it off by pressing the main power switch when
requested to do so.
If the PC is ready-to-operate, the PC consumes very little power.
When the PC is switched off with the main switch the PC no longer uses any power.
!
The main power switch and the power button do not disconnect the PC from the mains
voltage. To completely disconnect the mains voltage, remove the power plug from the
socket.
Ê Switch the monitor off (see the operating manual for the monitor).
On devices without main power switch
Ê Shut down the operating system properly. For Windows: select Shut Down from the Start menu.
Ê If the operating system does not automatically switch the PC off, turn the PC to ready-to-
operate when requested to do so by pressing the power button.
If the PC is ready-to-operate, the PC consumes very little power.
!
The power button does not disconnect the PC from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
Ê Switch the monitor off (see the operating manual for the monitor).

Fujitsu Siemens Computers SCENIC T Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENIC T
Category	Desktop
Language	English