Operation Keyboard
22 A26361-K657-Z101-4-7619
ON/OFF switch
Depending on the setting in the BIOS setup, the system can be switched on or off
with this switch. Some operating systems allow you to configure additional functions
of the ON/OFF switch in the Control Panel.
On some keyboards the power button can only be used with ACPI. Otherwise the
key is inoperative.
Enter key
confirms or starts the marked selection. The enter key is also referred to as the
"Return" key.
Start key
calls up the Windows Start menu.
Menu key
calls up the menu for the marked item.
Shift key
enables upper-case letters and the upper key symbols to be used.
Alt Gr
Alt Gr (e.g. German keyboard)
produces a character shown on the right-hand side of a key (e.g. the character "\"
on the key [ß]).
E
Euro key
enables the output of the Euro symbol.
Num
Num Lock key
by pressing the Num Lock key you switch between the Numeric keypad cursor
control functions and digit or comma functions.
When the Num Lock indicator is lit the digit and comma keys are active.
When the Num Lock indicator is not lit the cursor control functions are active in the
Numeric keypad.
Ctrl
Ctrl key
starts key combination actions.
Ctrl
Alt Del
Warm boot
restarts your PC. First hold down the [Ctrl] and [Alt] keys, and
then press the [Del] key. Under some operating systems the
Task Manager appears first. Then you must press all three keys
again to re-boot.
To Next Page
Loading...
Need help?
General
