Fujitsu Siemens Computers SCENIC T User Manual

Tips Troubleshooting and tips
A26361-K657-Z101-4-7619 31
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources. In this case you should:
Ê close unnecessary applications
or
Ê run the applications in a different order.
BIOS settings in Power Management are not activated (Windows 98 with APM function)
The Auto insert notification setting may be active for the CD-ROM drive. This setting causes
Windows 9x to inquire about any modifications on the drive at regular intervals. Because of this the
timer for the idle time cannot time out.
To activate power management, proceed as follows:
Ê In Windows 9x, select Start - Settings - Control Panel - System.
Ê Select the Device Manager tab. Click on the plus sign preceding the CD-ROM entry.
Ê Select the installed CD-ROM drive from the list (double-click).
Ê Select Settings.
Ê Deactivate the Auto insert notification box.
Ê Select OK and then Close. Confirm the reboot of the computer with Yes.
CD-ROM drive
Information on the CD-ROM drive is contained:
· in the manual of the CD-ROM drive
· on the CD "Drivers & Utilities"
Other manuals
Other manuals are contained on the "Drivers & Utilities" CD.

Fujitsu Siemens Computers SCENIC T Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENIC T
Category	Desktop
Language	English