Fujitsu ApeosPrint C4030 User Manual

110
5 Device
[User ID for Login] Sets text type of user ID for login.
When set to [Case Sensitive], login is done with the user ID in the
created form (including both upper and lower case). When set to
[Non-Case Sensitive], login is done without distinguishing upper and
lower case, even if there is mixture of upper and lower case in the
user ID.
[Login When Card
Reader Is Connected]
Enables user ID login when an IC Card reader is connected to the
machine, if logging in to local accounts.
User ID login cannot be used if set to [IC Card Login Only]. If set to
[IC Card / Control Panel Login], then both IC Card login and user ID
login can be used.
[Guest User] Enables use of guest users in case of log in to remote accounts.
[Account Auto Setup for
Card Login]
Enables account setup when an IC Card is held over the IC Card
reader if a user has not been created with log in to local accounts.
Account setup is not done if set to [Disabled]. Account setup is done
if set to [Enabled].
[Use of IC Card] Enables use of IC Cards when an IC Card reader is connected to the
machine.
When set to [On], it is possible to set for each feature whether to
control jobs with IC Cards.
[On (PKI Only)] is set when only the security feature is controlled,
without using an IC Card for authentication and job control.
[IC Card Link Mode] Enables requiring input of password at IC Card login in the case of
log in to remote accounts.
[Contactless IC Card
Logout Timing]
Sets the method of logging out in case of IC Card login.
If set to [Log Out When Card Is Removed], logout is done when the
IC Card is moved away from the IC Card reader. If set to [Log Out
from Control Panel], logout is done through operation of the touch
panel display.
[Cache Login
Credentials on Device]
Enables saving of user details used for log in to remote accounts in
the machine. [Enabled] is set, and even if the remote authentication
server has not been started at log in to remote accounts, the
machine can be used by logging in the user using user details saved
in the machine.
Note

This applies only to users who sets [IC Card Link Mode] to [No
Password Required] and logs in with an IC Card.

Users logged in using user details saved in the machine are set in
[(Remote Accounts Logged In with Cached Credentials)].
[Delete Cached Login
Credentials]
Enables deletion of user details for log in to remote accounts saved
in the machine.
Note

This applies only to users logged in with an IC Card.
Item Description

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English