Fujitsu ApeosPrint C4030 User Manual

185
10.2 Emulation
Blank paper ejection
Note

This is not reflected
if extension
command is sent.
51 - - [0]: None
[1]: Yes
Note

You can specify the blank paper ejection.

If “None” is selected, a blank page is not generated
in 2 page print or 2 sided print.

Blank paper is ejected if there is space created with
external fonts or white objects even if “None” is
selected.
Print digit range 52 - - [0]: Standard
[1]: Extension
Note

You can extend the right margin position.

If the right margin position is specified with a
command, the position becomes the right edge.
Image enhancement 53 213 163 [0]: OFF
[1]: ON
Character grade 55 - - [0]: High grade
[1]: Draft
Reduced character 56 - - [0]: None
[1]: Yes
Note

Characters can be reduced if alphanumerics are
printed.
Page length 58 - - [0]: 11 inches
[1]: 12 inches
1 inch perforation
skip
59 - - [0]: None
[1]: Yes
Note

You can have 1 inch between each page.

This specification is enabled only if “No cut sheet
feeder” is specified in “Paper position”.
Paper supply position 60 - - [0]: 8.5 mm
[1]: 22 mm
CR function 61 - - [0]: Return
[1]: Return line break
Note

This is not reflected if extension command is sent.

This affects the print result of 8 bit dot image print
command.
HP-GL mode - - 150 [0]: HP-GL
[1]: HP-GL/2
Note

This affects IW, OW, and UC commands.

If printing HP-GL/2 commands not including BP
commands, specify “HPGL/2”.
Hard Clip - - 151 [0]: Standard
[2]: Paper
Item Item Number Specification value
ESC PCL HP

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English