Fujitsu ApeosPrint C4030 User Manual

189
10.3 Direct Print
Programming
Enter the Item Number for the function in [Item Number] to display the current setting.
Enter the new value in [New Value] and tap on [Save] to change the setting.
If you are printing a PDF file without using ContentsBridge Utility, our software, this setting becomes
valid.
Note

If you using ContentsBridge Utility, only “Print process mode” will be enabled.
Refer

Refer to "Items" (P.189) for Item Number.
Password
If you set up a password, you can print PDF files secured with a password.
Note

The password should be 32 or fewer alphanumerics or symbols.

Depending on the PDF file security setting, the file may not be printable.
Items
Item Item Number Specification value
PDF DocuWorks
Number of outputs 401 501 [1] to [999]: 1 to 999
Note

If printing using lpr commands, the
specification of the number of outputs is
made with lpr commands. Due to this, this
setting will be invalid.
2 sided 402 502 [0]: None
[1]: Long side binding
[2]: Short side binding
Print mode 403 503 [0]: Standard
[1]: High speed
[2]: High resolution
Sort 404 504 Sort multiple copies by copy (1, 2, 3... 1, 2,
3...).
[0]: None
[1]: Yes
Layout
Note

Setting of this item is
enabled only if “PDF
Bridge” is specified
in “Print process
mode”.
405 505 [0]: Auto scale
[1]: Catalog (bookbinding)
[2]: 2 pages
[3]: 4 pages
[4]: 100% (scale)
Note

“Catalog (bookbinding)” is enabled for PDF
direct print.

Catalog (bookbinding) print is not valid
with some page structures. In this case, it is
printed in “Auto scale”.
Paper size 406 506 [0]: Auto
[1]: A4

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English