84
5 Device
[LPD]
[IPP]
[RAW] Set when printer driver output protocol is ASCII format or binary
format.
Data is output as is, without any control by the Adobe
communication protocol.
[PostScript Wait Timeout] When set to [Disabled], the time until the connection is
disconnected when printing data follows [Auto Eject Time].
If set to [Enabled], the time complies with the PostScript timeout.
Note
Set [Adobe Communication Protocol] to [RAW].
Item Description
[Port Status] Set to [Enabled] to use LPD.
[Port Number] Set port number used with LPD.
[Maximum Number of
Sessions]
Set maximum number of clients that can be connected
simultaneously to the machine with LPD.
Item Description
[Port Status] Set to [Enabled] to use IPP.
This is set when printing via the Internet using IPP (Internet Printing
Protocol).
[Added Port Number] Set so that IPP is received at a non-standard port number.
Item Description
To Next Page
Loading...
Need help?
General
