FUJITSU DL3100
User’s Manual 5-9
Level+B, Level+A,
Normal, Level-A,
Level-B, Level-C,
Level-D, Graphic
Set the line feed correction quantity
for continuous paper. (Correct the
line feed deviation when the line
feed is approximately 0.5 inch. If the
printing position deviates in the
upward direction, correct it in the +
direction.)
Regarding the correction quantity, A
is larger than D.
NOTE:
The Restore function cannot reset
those options which are handled by
the Fanfold LF Adj settings.
Fanfold LF Adj is correct when
Multi
Level+B, Level+A,
Normal, Level-A,
Level-B, Level-C,
Level-D, Graphic
Set the line feed correction quantity
for single carbonless copy paper.
(Correct the line feed deviation
when the line feed is approximately
1 inch. If the printing position
deviates in the upward direction,
correct it in the + direction.)
Regarding the correction quantity, A
is larger than D.
NOTE:
The Restore function cannot reset
those options which are handled by
the Single LF Adj Multi settings.
Single LF Adj Multi is correct when
Multi
Level+B, Level+A,
Normal, Level-A,
Level-B, Level-C,
Level-D, Graphic
Set the feed correction quantity for
continuous carbonless paper.
(Correct the line feed deviation
when the line feed is approximately
0.5 inch. If the printing position
deviates in the upward direction,
correct it in the + direction.)
Regarding the correction quantity, A
is larger than D.
NOTE:
The Restore function cannot reset
those options which are handled by
the Fanfold LF Adj Multi settings.
Fanfold LF Adj Multi is correct