Fujitsu ECLIPSE CD8455 - Non-Fader Phase Selection (NON-F Phase)

144
How to operate the Sound Adjustment Mode
Non-fader phase selection (NON-F Phase)
The merging of sound between the front and rear speakers and the
woofer can be improved by selecting the phase.
Switch to a phase which lets the speakers combine without any
disharmony.
Turn the [SEL] button to select Non-F Phase.
The selected item will be highlighted.
Press the [SEL] button.
The mode will change to phase selection mode.
Turn the [SEL] button to select NORMAL or
REVERSE.
NORMAL: Normal phase
REVERSE: Reverse phase
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
[SOUND] button
[RTN] button
[SEL] button
CD8455.book 144 ページ ２００４年１２月１１日 土曜日 午後７時２４分