Fujitsu ECLIPSE CD8455 - Disabling the Guide Tone Feature (for Button Operation)

61
Basic operation
IV
Disabling the guide tone feature (for button operation)
The receiver is set at the factory to emit a beep tone in response to
button operation. The guide tone feature may be disabled in the
following procedure:
Turn the [SEL] button to select Guide Tone.
The selected item will be highlighted.
Press the [SEL] button.
The guide tone mode will be switched ON/OFF.
Turn the [SEL] button to select ON or OFF.
The selected item will be highlighted.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in function
mode.
Press the [FUNC] or [RTN] button to exit function
mode.
[SEL] button
[RTN] button
[FUNC] button
CD8455.book 61 ページ ２００４年１２月１１日 土曜日 午後７時２４分