EasyManua.ls Logo

Fujitsu ECLIPSE CD8455 - Manually Setting Channels into Memory

Fujitsu ECLIPSE CD8455
240 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
207
How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)
XIV
Manually setting channels into memory
This section covers the setting of channels in memory under the
numbered buttons.
Turn the [SEL] button to the right or left to tune to the
channel to be entered in memory.
Select any button, from [1] to [6], and press it for more
than two seconds.
The tuned channel is now memorized and set in the button
selected. Repeat the procedure to set additional manually tuned
channels in memory, in turn, for buttons [1] to [6]. These buttons are
called the preset buttons.
If the vehicle’s battery is disconnected (for repairs to the vehicle or for
removing the receiver), all channels in memory will be lost. In such a
case, set channels in memory again.
[SEL] buttonButtons [1] to [6]
[FM AM] button
CD8455.book 207 ページ 2004年12月11日 土曜日 午後7時24分

Table of Contents

Related product manuals