Fujitsu ECLIPSE CD8455 - Non-Fader Output

145
How to operate the Sound Adjustment Mode
IX
Non-Fader Output
Non-Fader Output can be stereo or mono. Select the method that
matches the output method for the sub-woofer system that is
connected to the deck.
Turn the [SEL] button to select Non-F Output.
The selected item is highlighted.
Press the [SEL] button.
The mode will change to Non-F Output.
Turn the [SEL] button to select Stereo or Monaural.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
[SOUND] button
[RTN] button
[SEL] button
CD8455.book 145 ページ ２００４年１２月１１日 土曜日 午後７時２４分