Fujitsu ECLIPSE CD8455 - Selecting an Equalizer Mode from Memory

132
How to operate the Sound Adjustment Mode
Selecting an equalizer mode from memory
Press a preset button to select the equalizer mode set in memory
for the button. The buttons that set equalizer modes in memory are
called preset buttons.
Turn the [SEL] button to select PEQ.
Press the [SEL] button.
Select any button, from [1] to [5], and press it for
less than two seconds.
The preset pattern stored in memory will be retrieved.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
When the preset value is changed, the display shows as follows:
[SOUND] button
[
S
EL] button
[RTN] button
Buttons [1] to [5]
P
1~5 (Preset ch No.)
CD8455.book 132 ページ ２００４年１２月１１日 土曜日 午後７時２４分