(3) Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4) Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in [CA Port Group].
(5) Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6) Select the LUN group that is to be associated, and then click the [OK] button.
The name of the selected LUN group is displayed in [LUN Group].
4 Check the path between the host and the host interface port on the
ETERNUS AF in [Host - CA Port Connec-
tion], and click the [Create] button.
A confirmation screen appears.
5 Click the [OK] button.
The host affinity is created and the registration completion screen appears.
6 Click the [Done] button.
The screen returns to the [Connectivity] screen.
5. Component Expansion/Function Enhancement
Adding Servers
72
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
