3 Enter the LUN group name in [LUN Group Setting], and then click the [Add] button in [Define LUN Group].
The [Add LUN] screen appears.
4 Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN Setting], se-
lect the number for the first volume to be allocated, and click the [OK] button.
The LUNs that are to be registered in the LUN group and the information for the volumes that are allocated
to the LUNs are displayed.
5 Click the [Create] button.
A confirmation screen appears.
6 Click the [OK] button.
The LUN group is added and the setting completion screen appears.
7 Click the [Done] button.
The screen returns to the [LUN Group] screen.
■
Host Affinity Creation
Create an association between a host group and a CA port group and an association between a host group and a
LUN group to enable the host to recognize a LUN group.
The procedure to create a host affinity is as follows:
1 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click [Create Host
Affinity] in [Action].
The [Create Host Affinity] screen appears.
2 Select "Host Group - CA Port Group" in "Target Connection".
3 Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated.
(1) Click the [Browse] button in [Host Group].
A screen to select the host group appears.
(2) Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
• When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
• When "All" is selected
Select a host response, and then click the [OK] button.
5. Component Expansion/Function Enhancement
Adding Servers
71
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
