3 Enter the slot number of the Fibre Channel card installed in the server in the "Physical slot name" field
of the "WWN instance management table for the server".
Use the "/usr/platform/`uname -i`/sbin/prtdiag -v" command to check the installed Fibre Channel card
slot number.
Example: Excerpt from "/usr/platform/SUNW,SPARC-Enterprise-T5220/sbin/prtdiag -v" output
# /usr/platform/SUNW,SPARC-Enterprise-T2000/sbin/prtdiag -v
========================= IO Configuration ======================================
Location Type Slot Path Name Model
---------------------------------------------------------------------------------
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/bfa@0 bfa-pciex1657,13 Brocade-8+
IOBD/PCIE2 PCIE 2 /pci@7c0/pci@0/pci@8/bfa@0,1 bfa-pciex1657,13 Brocade-8+
Physical slot
name
WWN
Instance
name
Physical path name
Controller
number
/pci@7c0/pci@0/pci@8/bfa@0bfa0PCIE1
/pci@7c0/pci@0/pci@8/bfa@0,1bfa1PCIE2
4
Check the WWN of each Fibre Channel card.
(1) Use the following command to check the display order of the Fibre Channel card physical path
names.
# prtpicl -v -c scsi-fcp | grep devfs-path
Example:
# prtpicl -v -c scsi-fcp | grep devfs-path
:devfs-path /pci@7c0/pci@0/pci@8/bfa@0
:devfs-path /pci@7c0/pci@0/pci@8/bfa@0,1
(2) Use the following command to check the WWN of the Fibre Channel card that corresponds to the
physical path name. The result is displayed in the same order as shown in Step (1).
# prtpicl -v -c scsi-fcp | grep port-wwn
Example:
# prtpicl -v -c scsi-fcp | grep port-wwn
:bfa0-port-wwn 10:00:00:05:1e:e7:45:7b
:bfa1-port-wwn 10:00:00:05:1e:e7:45:7c
If the WWN does not appear in the procedure above, execute the "bcu port --list" command.
Chapter 4
Operations When Using Brocade Fibre Channel Cards
4.3 Setting Up the Server
76
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Copyright 2017 FUJITSU LIMITED
P3AM-6312-18ENZ0
To Next Page
Loading...
