Fujitsu Eternus DX600 S3 - Figure 7 Battery; Table 3 Status and Meanings of each LED (Battery)

LED name LED status Meaning
FAULT
(amber)
The PFM is in error status.
■
Batteries
Batteries are used for backup power source in case of power outage.
Batteries have LEDs.
Figure 7
shows the battery. Table 3 shows the status and meanings of each LED.
Figure 7 Battery
1 234
1. BRDY LED
2. CHG LED
3. BCA LED
4. BTA LED
The states of LEDs are listed below.
Table 3 Status and Meanings of Each LED (Battery)
LED name LED status Meaning
BRDY
(Battery Ready)
(green)
The battery charge rate is 90% or more.
CHG
(Charge)
(green)
The battery is being charged or is ready for discharge.
BCA
(BCU Alarm)
(amber)
The battery is in error status.
BTA
(BTU Alarm)
(amber)
The battery is in error status.
1. Component Names and LED Names
Controller Enclosures
15
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0