Fujitsu Eternus DX600 S3 - Figure 40 Fan Expander Module; Table 17 Status and Meanings of each LED (Fan Expander Module)

LED name LED status Meanings
READY
(green)
The I/O module is in normal status.
IDENTIFY
(blinks blue)
The installation location of the I/O module is identified according
to the instruction that is issued from ETERNUS Web GUI or ETER-
NUS CLI.
FAULT
(amber)
The I/O module is in error status.
■
Fan Expander Module
An Fan Expander Module is a cooling fan module.
Figure 40 shows the fan expander module. Table 17 shows the status and meanings of each LED.
Figure 40 Fan Expander Module
123
1. READY LED
2. FAULT LED
3. IDENTIFY LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 17 Status and Meanings of Each LED (Fan Expander Module)
LED name LED status Meanings
READY
(green)
The fan expander module is in normal status.
FAULT
(amber)
The fan expander module is in error status.
IDENTIFY
(blinks blue)
The installation location of the fan expander module is identified
according to the instruction that is issued from ETERNUS Web GUI
or ETERNUS CLI.
1. Component Names and LED Names
High-Density Drive Enclosure
39
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0