Fujitsu Eternus DX600 S3 - Rear; Components (Front); Figure 25 Rear Views of a 2.5;3.5 Type Drive Enclosure; Figure 26 Operation Panel (2.5;3.5 Type Drive Enclosure)

Rear
This section provides the names of the components on the rear of a drive enclosure.
Figure 25 Rear Views of a
2.5"/3.5" Type Drive Enclosure
12
34
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
Components (Front)
This section describes the operation panel and the drives in the front of the drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 26 shows the operation panel. Table 10 shows the status and meanings of each LED.
Figure 26 Operation Panel (
2.5"/3.5" Type Drive Enclosure)
2
1
3
4
1. DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
1. Component Names and LED Names
2.5"/3.5" Type Drive Enclosures
29
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0