Fujitsu Eternus DX600 S3 - Figure 47 Power Distribution Unit (AC200-240 V, 2 U, 16 Outlets); Figure 48 Power Distribution Unit (AC200-240 V, 2 U, 16 Outlets)

■
Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
For power distribution units (AC200-240V, 2U, 16 Outlets)
, there are two different types of exteriors.
There are 16 outlets.
Figure 47 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
2
1
1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
Figure 48 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
2
1
1
1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
1. Component Names and LED Names
Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)
45
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0