Fujitsu Eternus DX600 S3 - Figure 27 2.5 Drives; Figure 28 Drive Slot Numbers (2.5 Type Drive Enclosure); Table 10 Status and Meanings of each LED (Operation Panel (2.5;3.5 Type Drive Enclosure))

The LEDs turn on or blink to indicate the statuses that are listed below.
Table 10 Status and Meanings of Each LED (Operation Panel (
2.5"/3.5" Type Drive Enclosure))
LED name LED status Meanings
IDENTIFY
(blinks blue)
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
FAULT
(amber)
The drive enclosure is in error status.
POWER
(green)
DC power is supplied to the drive enclosure.
■
Drives
● 2.5" Drives
Figure 27 shows the 2.5" drive. Figure 28 shows the slot number of each 2.5" drive.
Table 11 shows the status and meanings of each LED.
Figure 27 2.5" Drives
12
1. DRIVE READY LED
2. DRIVE FAULT LED
Figure 28 Drive Slot Numbers (2.5" Type Drive Enclosure)
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
1. Component Names and LED Names
2.5"/3.5" Type Drive Enclosures
30
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0