2.5"/3.5" Type Drive Enclosures
Drives and an operation panel are installed in the front of 2.5" and 3.5" type drive enclosures. I/O modules and
power supply units are installed in the rear.
Front
This section provides the names of the components on the front of a drive enclosure.
■
2.5" Type
Figure 23 Front View of a 2.5" Type Drive Enclosure
1. Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type
Figure 24 Front View of a 3.5" Type Drive Enclosure
1. Operation panel
2. 3.5" drive
3. Flange cover
1. Component Names and LED Names
2.5"/3.5" Type Drive Enclosures
28
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0