Fujitsu Eternus DX600 S3 - Figure 13 Host Interface for FC Cable Connections (2 Port, Equipped with SFP+ Modules in All Ports); Figure 14 Host Interface for Copper Twinax Cable Connections (2 Port)

7. Host Interface Port #3
● Host Interface (for FC Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with an FC cable.
There are five types of 2port host interfaces for FC cable connections: FC 32Gbit/s, FC 16Gbit/s, FC 8Gbit/s, iSCSI
10Gbit/s, and Ethernet 10Gbit/s.
Figure 13
Host Interface for FC Cable Connections (2port, Equipped with SFP+ Modules in All Ports)
4 5
12 3
1. CA FAULT LED
2. CA READY LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
● Host Interface (for Copper Twinax Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
There are two types of 2port host interfaces for Copper Twinax cable connections: iSCSI 10Gbit/s and Ethernet
10Gbit/s.
Figure 14 Host Interface for Copper Twinax Cable Connections (2port)
12 3
4 5
1. CA FAULT LED
2. CA READY LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
1. Component Names and LED Names
Controller Enclosures
20
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0