Fujitsu ETERNUS LT260 - Page 35

Chapter 2 Operating the Library
2.5 Configuring the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
35
- + Warnings
Only critical and warning events are sent.
- + Configuration
Only critical, warning, and configuration events are sent.
- + Information
All events are sent.
• SNMP Targets
List of configured SNMP targets.
■ To add an SNMP target or edit information for an SNMP target
Procedure
1 Click Edit for the appropriate SNMP target. When adding an SNMP target, click Edit next to a
target without an IP/Hostname.
2 Enter the target IP address or hostname.
3 Enter the port.
4 Select the SNMP version.
5 Enter the SNMP community string for the target.
6 Click Submit.
End of procedure
■ To delete an SNMP target
Procedure
1 Click Delete for the target to be deleted.
2 Click Submit.
End of procedure