Chapter 2 Operating the Library
2.8 Viewing Status Information
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0
72
• Partition
The partition number
■ Filtering by Barcode Label
To filter the list based on barcode label, enter characters in the filter box and then click Search.
1 Click Filter On.
The search box is displayed.
2 Enter characters into the search box and then click Search.
The characters can be anywhere in the barcode label. The search characters are not case sensitive.
There are no wildcards.
To disable filtering, click Filter Off.
■ Listing Just Drives or Cartridges
To limit the list to tape drives, click Drives.
To limit the list to cartridges, click Cartridges.
To see all elements, click Partition or Slots.
■ Viewing Elements by Group
When the list is grouped, you can expand or contract the list for each group by clicking the triangle next to the
number in the first column. Grouping is enabled by default.
To disable grouping, click Group Off.
To enable grouping, click Group On.
To Next Page
Loading...
