First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Im portant notes " , Page 6.
If your de vice is equipped with a W indows operating s ystem, the necessary
hardware drivers and supplied software are already pre-installed.
A system test is pe rformed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time o r may flicker.
Please follow the i nstructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartme nt or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the mo ve, the built-in ba ttery pro vides the device with th e necessary power. You
can increase the operat ing time by using the available energy-saving functions.
For instructions on how to conn ect external devices (e.g. mouse, printer) to your
device, please refer to t he operating manual for your device.
Unpacking and checking the de
vice
Should you discover any dama ge that o ccurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your device for any visible damage w hich may have occurred during tra nsp ortation.
You may need the packaging in the future, if you need to transport your device.
A26391-K214-Z200-1 -7619 , edition 1 9
To Next Page
Loading...
