First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
The device must be supplied with power through the mains adapter during this pro cess.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you s hould set aside e nough time for it to be fully completed and connect
the device to th e mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first tim e, the operating syste m
is pre-installed on the hard d
isk.
► Switch on your device.
► During insta llation, follow the instructions on screen.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your device, you will find more
information on t he system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet under "
http://ts.fujitsu.com/support".
A26391-K214-Z200-1 -7619 , edition 1 11
To Next Page
Loading...
