Removing and i nst alling compone nts
during servicing
Installing a hard disk
If you are installing more than one component at the same time , keep the screws for
the individual compo nents sepa rately from each other and make sure that you use the
correct screw s. If you install the wrong screws, components may be damaged.
3
3
2
1
► Place the hard disk into the hard disk compartme nt (1).
► Push the h ard disk in the direction o f the arrow (2) until the contacts engage.
► Fasten the screws (3).
A26391-K214-Z200-1 -7619 , edition 1 49
To Next Page
Loading...
