Removing and installing c omponents
during servicing
Installing a memory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot ( 1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
1
► Place the cover in the correct mounting position (1).
If you remo ve more than one component at the same time, kee p the screws for the
individual c omponent s separa te from each other and make sure that you use the correct
screws. If you install the wrong screws, components may be damaged.
► Tighten t he screw (2).
46 A26391-K214-Z200-1-7619, editio n 1
To Next Page
Loading...
