Removing and installing c omponents
during servicing
Removing a hard disk
1
1
2
3
► Remove the screws (1).
Keep the screws in a safe place. If you are removing more than one componen t at
the same time, store the screw s for the individual compone nts separately from each
other. If you install the w rong screws, compo nents may be damaged.
► Push the hard disk in the direction of the arrow (2) until the contacts disengage.
► R emove the hard d isk from the hard disk compartment (3).
48 A26391-K214-Z200-1-7619, editio n 1
To Next Page
Loading...
